…It’s a fork of the Retro-Go emulator for ODROID-GO and other ESP32 devices, but with various optimizations. It was tested on an off-the-shelf ESP32-S3 board with…
…It provides stable SPI, I²C, and UART connections, making it much more reliable for long-term telemetry and gateway use. On the software side, RAKwireless provides a ready-to-use Raspberry Pi…
…As mentioned in the introduction, the camera is modular thanks to its two PMOD connectors for a thermal camera (32×24, 160×120, or 256×192, and up to 640×480 with…
…or AI accelerator, two MIPI DSI/CSI connectors for cameras or displays, and a 40-pin GPIO header. The flat cables for the MIPI devices can be passed through an opening under…
…Raspberry Pi SBCs I2C and I3C connectors (7 and 8 below) Misc Boot and Reset buttons Power LED RTC battery connector (5) USB Host/Device jumper (13) Ceramic antenna for WiFi and…
…People purchase the OEC or OEC-Turbo device and install it at home to be part of a distributed P2P CDN (Content Delivery Network), caching data for other nodes operating nearby. As…
…The SATA board pictured above is connected to the board through a PCIe x1 socket with SATA signals (no actual PCIe to SATA signal conversion here). Let’s have a closer look…
…In practise, 80 to 90% of requests would happen on the device thanks to this hybrid local/online implementation. It supports running large models (e.g., 27B or up to 120B in…
…The devices target fiber-to-the-home (FTTH) infrastructure, such as home gateways, ONTs/ONUs, and multi-gigabit CPE, to deliver ultra-fast, low-latency connectivity for AI workloads, UHD streaming, and…
…The device weighs just around 500 grams but can handle a 1kg dynamic load and a 3kg static load. It communicates via USB-C or Bluetooth 5.0 and comes with a…